作者搜索 |
![]() |
新闻 |
10.5.5C-DBLP系统正式发布作者研究兴趣及学术活动展示功能,请访问作者页面试用。
|
09.7.6C-DBLP的文献BibTex信息展示功能正式上线,请访问文章详细页面使用。
|
09.7.29C-DBLP系统新增同名区分功能,欢迎大家在作者页面试用。该功能部分使用了清华大学王建勇老师课题组提出的GHOST(GrapH-based framewOrk for name diStincTion)算法,在此表示感谢。
|
09.6.2C-DBLP系统集成了作者的相关图片并在搜索结果页面展示,敬请试用。
|
| 基于FFT的双基地综合脉冲孔径雷达发射阵校准 BibTex | |
| 作者: | 陈多芳 陈伯孝 刘春波 张守宏 |
| 单位: | 西安电子科技大学雷达信号处理国家重点实验室 陕西西安710071 |
| 关键词: | 双基地;综合脉冲孔径雷达;发射阵校准;直达波 |
| 出处: | 电子学报 2008 年 03期 |
| 基金: | 国防预研资助项目(No.40106020203);教育部优秀人才支持计划(No.NCET-06-0856) |
| 全文链接: | 查看全文>> |
| 摘要: | |
| 本文结合高频岸-舰双基地综合脉冲孔径雷达(SIAR)的特点,利用接收到的直达波信号以及全球定位系统(GPS)测得的接收站位置信息,提出基于FFT的发射阵增益、相位以及位置误差校准方法.仅存在增益和相位误差时,校准需已知一个接收站方位;增益、相位和位置误差都存在时,需要三个接收站方位.文中推导了对这三个接收站方位的要求,研究了接收平台运动和存在多径效应时的校准方法,分析了GPS角定位误差对校准的影响.计算机仿真表明了该方法对发射阵的增益、相位以及位置误差具有良好的校正性能.由于无需精确校准的辅助阵元或方位精确已知的辅助信源,并且运算量小,该方法易于工程实现. | |
| 正文快照: | |
| 1引言高频岸-舰双基地综合脉冲孔径雷达(SIAR)利用在海岸上的发射站发射信号,并采用综合脉冲孔径技术得到发射方向图.其发射站采用多个天线同时辐射不同载频信号以保证各向同性照射,接收站安装在舰船上,采用一个全向天线接收[1].该雷达兼备高频雷达和双基地雷达的优点,如工作在 | |
| Transmit Array Calibration for Bistatic Synthetic Impulse and Aperture Radar Based on FFT | |
| Author: | CHEN Duo-fang;CHEN Bai-xiao;LIU Chun-bo;ZHANG Shou-hong (National key laboratory for radar signal processing;Xidian University;Xian;Shaanxi 710071;China) |
| Keywords: | bistatic;sythetic impulse and aperture radar(SIAR);transmit array calibration;direct wave |
| Abstract: | |
| A method for calibrating the gain,phase and location of the transmit array based on FFT is presented,where the features of bistatic Sythetic Impulse and Aperture Radar(SIAR),the received direct wave and the receiver direction measured by Global Position System(GPS) are employed.One receiver direction is necessary for the gain and phase calibration,while three directions are needed for the gain,phase and location calibration.A discussion is made of the requirement for the three directions and the calibration in the presence of moving receiver and multi-path.The effect of GPS measurement uncertainty is analyzed.The computer simulation shows that the performance of the calibration method is high.The method can also be easily implemented owing to its small amount of computation and no need for accurate auxiliary antenna or auxiliary sources. | |

10.5.5